Mega Mass Plastics - Elbow
Barbed 90° elbow fitting for changing the direction of flexible irrigation and hydroponic tubing without adding unnecessary hose length or kinks. These insert-style elbows push directly into flexible tubing and are useful anywhere a water or nutrient line needs to make a clean 90° turn.
Suitable for pumps, reservoirs, irrigation systems, hydroponic systems, garden watering setups and general DIY water-line plumbing.
Available Sizes
| Size | Connections | For Flexible Tubing |
|---|---|---|
| 3/16" | Two 3/16" barbed ends | 3/16" nominal ID tubing |
| 3/8" | Two 3/8" barbed ends | 3/8" nominal ID tubing |
| 1/2" | Two 1/2" barbed ends | 1/2" nominal ID tubing |
| 5/8" | Two 5/8" barbed ends | 5/8" nominal ID tubing |
| 3/4" | Two 3/4" barbed ends | 3/4" nominal ID tubing |
| 1" | Two 1" barbed ends | 1" nominal ID tubing |
| 1-1/4" | Two 1-1/4" barbed ends | 1-1/4" nominal ID tubing |
| 1-1/2" | Two 1-1/2" barbed ends | 1-1/2" nominal ID tubing |
Sizing note: Sizes refer to the nominal inside diameter (ID) of the flexible tubing the fitting is intended for. The outside diameter of the barb itself is intentionally larger than the listed tubing size so that the barb grips securely inside the hose. Please use gentle heat to soften the tube if you are having trouble with insertion.
Please note: Barb profile, mould style, colour and appearance may vary between production batches and shipments. Different-looking fittings may still be intended for the same nominal tubing size.
SKU: MMP380-0240We Also Recommend
- choosing a selection results in a full page refresh